How to wire metal push button switch
May 24, 2023
Metal push button switch is a kind of common electronic switch, which is beautiful, durable and so on. It is widely used in various electronic equipment. The following describes how to connect metal push button switches.
1. Determine the type of switch: First, determine the type of metal button switch to be used, such as single-pole single-pole double-pole switch, etc. Different types of switches are connected in different ways. Therefore, you need to determine the switch type first.
2. Determine the cable position: Before installing the metal button switch, determine the cable position. Normally, the wiring position of the metal pushbutton switch will be at the bottom or side of the switch.
3. Wiring mode: There are two main wiring modes of the metal button switch, one is fixed with screws, the other is fixed with welding. Select the connection mode based on the actual situation.
4. Wiring procedure: When connecting cables, strip part of the power cable and switch cable, and insert them into the wiring holes at the bottom or side of the switch. Pay attention to the polarity and position when connecting cables to ensure that the cables are correctly connected.
5. Secure the switch: After cables are connected, secure the metal button switch to the device. If screws are used to secure the switch, align the holes at the bottom of the switch with those in the device, and then secure the switch with screws.
If the switch is secured by welding, weld the switch cable to the circuit board in the device.
To sum up, the wiring method of metal push button switch needs to be selected according to the type of switch and equipment. Pay attention to the polarity and position when connecting cables to ensure that the cables are correctly connected.
